Skip to content 
Your Crew Has Enough to Handle. The Metal Should Not Be Another Problem
Maple Ridge sites deal with wet winters, exposed rooftop runs, and trades stacked tight against each other. The last thing your schedule needs is ductwork that misses the drawing or stainless that shows up half finished. Duct Duct Goose fabricates commercial ducts, fittings, kitchen components, and custom assemblies from our shop just across the line in Pitt Meadows, built for Lower Mainland conditions. The result is a cleaner install, fewer trips back to the brake, and metal that lands when the next trade is ready.
- Cut Field Adjustments
- Match Approved Drawings
- Protect Install Sequencing
- Support System Performance
Local Owned
Years of Experience
Send the Specs, We Handle It From the Brake to the Jobsite
Send the drawings, dimensions, material call-outs, and site schedule. We review the scope, flag anything that does not add up, and prepare your ductwork or stainless components for a clean handoff. One conversation now saves a scramble later.
Why Maple Ridge Contractors Bring the Tough Fabrication Packages Here
Ductwork and Stainless, Cut From the Same Floor
Duct Duct Goose handles commercial ductwork and stainless steel fabrication under one roof, so the duct package and the kitchen package do not arrive from two suppliers on two different timelines. Custom ducts, fittings, enclosures, and welded assemblies are checked against the approved drawings, applicable SMACNA construction standards, airflow requirements, and the finish the job calls for. That is what gives a crew dependable fit and a shop that already speaks the language of the field.
Upfront
Approve before
we cut.
Hard Parts
Reducers, offsets,
and welds stay
in-house.
Released
Shipped in
install order.
Built to the Drawing, Ready for the Inspector
Commercial sheet metal has to do more than look clean on the bench. It has to move the designed air, hold up to sanitation and wash-down, and last through years of service. We build from the approved drawings, ensuring the metal holds up to the conditions the part will actually face.
Metal Matched to Where It Ends Up
Stainless steel, galvanized steel, aluminum, and specialty metals each earn their place in a different environment. Grade and gauge get matched to moisture, temperature, pressure, cleaning routine, and expected wear, so the finished part performs where it is actually installed and not just where it was drawn.
Duct That Holds the Air It Is Supposed To
Accurate dimensions, tight seams, and the right joint construction keep leakage down and protect designed airflow. Clean connections also speed up the install in mechanical rooms, ceiling spaces, and the tight commercial layouts where there is no room to fight a bad fit.
Fabricated to the Applicable SMACNA Standards
Ductwork follows applicable SMACNA construction standards, the approved project specifications, relevant ASHRAE guidance, and local building requirements. Reviewers get fewer open questions, and the crew gets components prepared for inspection rather than argued over on site.
The Awkward Geometry, Solved Before It Ships
Reducers, offsets, plenums, transitions, and stainless assemblies are built around the clearances and connection points on the job, not a catalogue standard. Solving that geometry in the shop protects airflow, keeps service access open, and holds the installation sequence together.
What Maple Ridge Contractors Ask Us To Build Every Day
A commercial package rarely stops at one duct or one stainless part. We handle the ductwork and stainless package together, and keep dimensions aligned, checking the quality of every part before it leaves our shop. These are the core services Maple Ridge HVAC, kitchen, laboratory, and industrial projects lean on most.
Custom HVAC Ductwork
Our HVAC ductwork fabrication covers rectangular, round, and project-specific sections for commercial systems. Each run is shaped around airflow, pressure, route, and connection details, so mechanical contractors get duct that matches the layout instead of duct they have to rework.
Duct Fittings and Transitions
Elbows, reducers, offsets, branches, and transitions solve the geometry standard inventory never quite fits. As custom duct fitting fabricators, we work from confirmed dimensions to hold the connections, cut field trimming, and keep air moving cleanly through complicated routes.
Equipment Exhaust and Fume Extraction Ducting
Process areas, laboratories, and industrial floors often need a dedicated exhaust path. Our equipment exhaust ducting and fume extraction fabrication are built around discharge conditions, routing, and corrosion exposure spelled out in the project documents.
Roof Curbs, Filter Boxes, and Air Controls
Rooftop units and filtration systems live or die on their interfaces. Custom roof curbs and flashing anchor equipment and shed water, while made-to-spec filter boxes and air-control assemblies keep access, filtration, and airflow working together.
Kitchen Hoods and Grease Ductwork
Back-of-house metal has to handle heat, grease, capture, and constant cleaning around fixed equipment. Skilled commercial kitchen fabrication covers made-to-spec hoods, grease ductwork, and the stainless components that hold up to a working line.
Stainless Steel Counters, Sinks, and Prep Tables
A kitchen runs on work surfaces that fit the actual line. Professional stainless steel fabricators build custom countertops, commercial sinks, and food prep tables around real dimensions, workflow, and the daily reality of wash-down.
Stainless Steel Shelving and Storage Cabinets
Storage should give the kitchen room to move, not crowd it. Custom restaurant shelving and metal dish cabinets are built around the wall space you have, the loads they carry, and the clearances the crew needs to reach them.
Supports, Enclosures, and Specialty Assemblies
Equipment supports, protective housings, brackets, drain pans, and one-off assemblies solve the problems a catalogue cannot. Our custom metal support and enclosure fabrication is built around equipment dimensions, load, service access, and the exposure the part has to survive.
When the Schedule Tightens, Communication Has to Get Sharper
Speed That Still Follows the Drawing
Active jobs move. Dimensions shift, release dates slide, and equipment selections land late. We confirm the change and clear production updates for pickup or delivery planning for Maple Ridge orders. Fast is good, but the drawing still calls the shots.
-
When the Drawing Changes Mid-Build
Send the revised dimension, the marked-up sheet, or the updated connection detail. We review the change, confirm what it touches, and set the next production step before more metal gets committed.
-
A Rushed Order Still Gets the Checks
Quick turnaround should never buy you weak seams, sloppy alignment, or early corrosion. Material selection, assembly quality, and dimensional checks stay in the process even when the calendar is tight.
Social Media :
Our Process
How a Maple Ridge Order Moves Through the Shop
Good fabrication starts well before the first sheet hits the brake. Every Maple Ridge order runs through the same deliberate path: review, material, production, inspection, and handoff. That structure protects your dimensions, construction quality, finish, and schedule across both the duct and the stainless.
1. Start With the Drawing, Not Assumptions
Drawings, specifications, quantities, connection details, and operating requirements get reviewed first. Catching an unclear dimension, an access conflict, or a missing note here is far cheaper than catching it after the part is already cut.
2. Match the Metal to the Job
Material, grade, gauge, and finish are chosen around moisture, pressure, temperature, cleaning, corrosion, and load. It is worth reviewing the available sheet metal materials and finishes before the order is locked in.
3. Where the Drawing Becomes Metal
Approved dimensions drive the cutting, bending, welding, forming, and assembly. Our cutting and bending capabilities and welding and assembly services keep parts repeatable and the whole package coordinated.
4. Check It Before the Crew Sees It
Finished work is reviewed for dimensions, alignment, seams, finish, and connection points. The idea is simple: catch a shop problem in the shop, not up a ladder in a ceiling space or on a kitchen line.
5. Protect the Handoff
Orders are packaged around size, finish, and delivery order. Pickup or jobsite delivery is timed to your schedule, so the receiving crew gets organized components and a clear path into the install.
Less Field Cutting, Cleaner Close-In, Better System Performance
Fabrication the Crew Can Feel on Site
Poorly coordinated metal costs far more than shop time. It eats labour, drags out ceiling close-in, complicates equipment connections, and throws off the trades waiting behind you. Fabrication that reflects the approved documents lets the whole system come together the way it was designed.
Reduce Field Trimming
Protect Labour Hours
Improve Airflow Control
Simplify Trade Handoffs
Extend Service Life
Duct Duct Goose ties drawings, material decisions, shop execution, carrying the job from drawing review through fabrication and delivery. Contractors get cleaner releases, crews spend less time fixing avoidable conflicts. The installed system holds airflow, fits the equipment, and stays easier to service. That holds for a commercial duct package and a stainless assembly alike.
Built for the People Carrying the Project Schedule
Duct Duct Goose supports the Maple Ridge professionals juggling drawings, equipment, sanitation, access, airflow, and the calendar. Each one gets support shaped around their piece of the project.
HVAC and Mechanical Contractors
Commercial Kitchen Contractors
General Contractors and Commercial Builders
Engineers, Facility Teams, and Industrial Managers
The Details That Decide Whether Metal Installs Cleanly
Good Fabrication Is More Than the Shape of the Part
Two components can share the same footprint and behave nothing alike on site. Gauge, reinforcement, joint design, finish, access, labelling, and packaging all shape what happens after the metal leaves the shop. Getting them right is how a Maple Ridge contractor protects both the install and the years of operation after it.
Choosing the Metal and the Thickness
The right material balances corrosion resistance, strength, weight, hygiene, and cost. Gauge has to suit pressure, span, impact, and handling. Get both right, and you avoid overbuilding one part while leaving another too thin to trust.
What Keeps a Duct From Rattling and Leaking
Size alone does not make a duct perform. Pressure class, reinforcement, joint construction, and fitting geometry decide leakage, vibration, and deflection. Those calls are made against the system documents and the conditions the duct will actually see.
A Seam Is Never Just a Seam
Seams and welds carry real weight. They affect leakage, cleanability, corrosion exposure, strength, and appearance all at once. The construction method has to match the material, the application, and how often the part gets cleaned.
Room to Service It Later
A part can fit the opening perfectly and still box in the maintenance it needs. Access doors, removable panels, filter changes, and equipment service zones get considered before anything is fabricated.
Finishes That Survive Daily Wash-Down
Kitchens and hygienic spaces need smooth surfaces, clean corners, and finishes built for repeated wash-down. The finish also decides how much every scratch and fingerprint shows once the space is in daily use.
Where the Part Meets Everything Else
Ductwork, hoods, curbs, sinks, cabinets, and enclosures all connect to something. Confirmed flanges, outlets, penetrations, and support points cut out field improvising and make trade coordination easier.
Labelled and Staged for the Install Order
A large order gets hard to install when parts show up unmarked or out of order. Clear identification, protected finishes, grouped assemblies, and staged release help the crew grab the right piece at the right phase.
Delivery That Fits the Site, Not Just the Truck
Delivery planning has to account for site access, storage room, crane dates, floor readiness, and install order. A coordinated handoff protects the finished work and keeps a busy commercial site from jamming up.
Maple Ridge Projects, Run From the Shop Next Door in Pitt Meadows
Duct Duct Goose sits just across the line in Pitt Meadows and supports commercial work throughout Maple Ridge. Being close to your sites shortens the communication loop and makes delivery planning simpler to pin down. From Haney and Port Hammond to Albion, Ruskin, and Whonnock, you are working with a shop that stays reachable from the first drawing review through the final release.
Maple Ridge postal codes we regularly fabricate for:
V2X 1B6
V2X 2T3
V2W 1P2
V2W 2S3
Searching for a Commercial Sheet Metal Shop Near Maple Ridge?
If you are looking for a commercial fabricator close to Maple Ridge, the Pitt Meadows floor is a short run from most sites in the area. We cover the full commercial scope, from HVAC duct to stainless kitchen work, and we know the roads, the job sites, and the local landmarks that keep a delivery on schedule.
Notable Local Landmarks
Commercial Sheet Metal Fabrication FAQs
Maple Ridge projects can order custom HVAC ductwork, fittings, exhaust ducting, roof curbs, filter boxes, stainless commercial kitchen components, supports, enclosures, and specialty assemblies from a nearby commercial fabrication shop.
Custom ductwork makes sense when standard parts cannot hit the required dimensions, route, airflow, pressure, or equipment connection shown in the documents. That is usually where custom duct fittings and transitions come in as well.
Stainless work can include hoods, counters, sinks, prep tables, shelving, cabinets, HVAC sections, enclosures, and other made-to-spec products for commercial kitchens and industrial spaces.
The shop reviews dimensions, quantities, materials, gauges, connection details, and finishes up front, and resolves anything unclear before the order is released. You can see how that connects to our cutting, bending, welding, and assembly work.
Ductwork is fabricated in line with applicable SMACNA construction standards, the approved drawings, and the project specifications. Duct Duct Goose does not present that adherence as third-party certification.
Timing depends on quantities, materials, complexity, drawing readiness, approvals, production capacity, and delivery sequence. Complete information up front makes for a more realistic release schedule, and you can check current service areas for delivery coverage.
