Skip to content 
Jobsite-Ready Ductwork & Stainless Steel Fabrication for Coquitlam Contractors
Coquitlam job sites cover a lot of ground, from wet rooftop mechanical work on the City Centre towers to tight industrial bays off United Boulevard. Ductwork that arrives late, or a hood that misses the shaft by half an inch, stalls every trade behind it. Duct Duct Goose fabricates ductwork, fittings, kitchen hoods, and stainless steel components in-house, built from your drawings in galvanized steel, stainless steel, or aluminum. Your crew gets parts that match the plans, so installation runs without the wait.
- Build To Your Drawings
- Cut Field Rework
- Match Airflow Specs
- Protect Rooftop Finishes
Local Owned
Years of Experience
Get Made-to-Spec Sheet Metal Fabrication in Coquitlam
Send your drawings, and our fabrication team turns them into ductwork and components ready for installation. We support HVAC and mechanical contractors across Coquitlam and Greater Vancouver with accurate parts and clear lead times. Start your Coquitlam order today.
What Sets Our Coquitlam Sheet Metal Fabrication Apart
Accurately Built Parts, Clear Pricing, Fewer Field Adjustments
Our shop is built on hands-on HVAC and fabrication experience, and it shows in the work. As local sheet metal experts, we fabricate ductwork, fittings, kitchen hoods, and stainless steel components for commercial and industrial HVAC projects across Coquitlam and Greater Vancouver. Our shop pairs CNC cutting and forming with in-house welding to produce duct sections, transitions, and welded assemblies. Every part is checked against your drawings for fit, airflow, and durability, making us a dependable partner for Coquitlam contractors.
In-House
One shop handles every step
Upfront
Pricing set before we build
Accurate
Parts matched to your drawings
Fabricated to Code and Ready for Inspection in Coquitlam
Material Matched to the Job
Different projects call for different metals, and choosing the wrong one can create problems long after installation. We fabricate standard HVAC ductwork in galvanized steel, use stainless steel where moisture, grease, or frequent wash-down matters, and work with aluminum when a lighter, corrosion-resistant option makes sense. Material type and gauge follow your drawings, specifications, and the conditions the finished component will face.
Cleaner Seams, Better Airflow
A duct system cannot move air properly if the fittings are sloppy or the seams leak. We form duct sections, elbows, reducers, and transitions to tight dimensions so the pieces line up cleanly when your crew installs them. Properly fitted and sealed seams help limit air leakage and unnecessary pressure loss, especially on longer duct runs and larger Coquitlam commercial systems.
Fabricated to the Project Specifications
Your drawings set the requirements, and our fabrication follows them. We build ductwork around the specified pressure class, sealing requirements, material, gauge, and dimensions while working in line with applicable SMACNA standards and relevant ASHRAE guidance. That gives contractors fabricated components that arrive ready to fit the mechanical design instead of leaving the install crew to correct preventable issues on site.
Custom Pieces Built to Fit the Space
Mechanical rooms, shafts, rooftops, and renovation projects rarely give installers unlimited room to work. We fabricate reducers, offsets, transitions, plenums, roof curbs, and custom duct sections around the measurements and clearances shown on your plans. When a project calls for an unusual angle or a tight connection, we work through the geometry in the shop so your crew spends less time cutting, modifying, and rebuilding parts in the field.
Sheet Metal Fabrication Services We Handle Across Coquitlam
Commercial Sheet Metal Fabrication
Our commercial sheet metal contractors build made-to-spec parts for offices, retail, and mixed-use projects around Coquitlam City Centre. Work ships ready to install, which suits fast-moving construction schedules.
HVAC Ductwork Fabrication
We fabricate rectangular, round, and spiral duct, plus the fittings and transitions that tie a system together. Every run is sized to the mechanical plan for clean airflow and quick installation on Coquitlam builds.
Stainless Steel Fabrication
Our stainless steel fabricators produce corrosion-resistant components for kitchens, labs, and wash-down areas. Stainless steel holds up to moisture and heavy cleaning, which matters across Coquitlam’s growing foodservice and institutional spaces.
Commercial Kitchen and Exhaust Fabrication
Restaurants and cafes filling in at Fraser Mills and the City Centre need hoods, grease duct, and exhaust built to fire-safety requirements. We build these to your kitchen layout and equipment.
Industrial Ventilation and Exhaust Fabrication
Shops and plants along United Boulevard run equipment exhaust and process ventilation in heavier gauges. We build exhaust ducting and connections that stand up to the load and the duty cycle.
Custom Metal Supports and Enclosures
Rooftop units, curbs, stands, and equipment enclosures protect gear from Coquitlam’s wet weather and physical knocks. Our fabricators build supports that carry the load and clear the access you need.
Laboratory and Fume Exhaust Fabrication
Labs and medical spaces need controlled exhaust and corrosion-resistant ductwork. We fabricate fume hoods and lab exhaust to the containment and airflow the facility calls for.
Responsive Fabrication Support When Coquitlam Job Schedules Get Tight
Keep Your Coquitlam Project Moving
Tight schedule? Send us the drawings, dimensions, and job requirements, and we will help you line up the fabrication before your crew is waiting on parts. We provide clear lead times, review the order before cutting, and coordinate delivery around the project schedule.
Call to line up fabrication for your next Coquitlam project, or send your drawings and request a quote today.
-
Talk Through the Details First
Unsure about material, gauge, or how a fitting should break down for a tight space? Bring it to our fabricators before the order is released. Sorting those details early helps reduce field changes once the metal is already cut.
-
Get Parts Built for the Install
We fabricate ductwork, fittings, and custom metal components to match your plans and site constraints. Clean welds, sealed seams, and checked dimensions help your crew install with fewer surprises and fewer reasons to come back after the job is finished.
Social Media :
Our Process
How Your Coquitlam Order Moves From Approved Drawings to Install-Ready Metal
1. Consultation, Review, and Planning
Every custom ductwork fabrication project in Coquitlam starts with the drawings, specifications, and site conditions. Our team reviews dimensions, gauges, airflow requirements, and available clearances before production begins. If a transition, fitting, or duct section will not clear a shaft or mechanical room, we flag it early so your crew is not solving the problem during installation.
2. Material Selection and Preparation
Material gets matched to the application, not pulled from the rack by habit. Our Coquitlam sheet metal fabrication team works with galvanized steel, stainless steel, and aluminum based on the exposure, finish, and specifications shown on your plans. Sheets are prepared and staged carefully so gauges, dimensions, and finishes remain consistent throughout the fabrication run.
3. Precision Production and Assembly
Cutting, forming, welding, and assembly all happen in-house for tighter control over the finished components. Our HVAC sheet metal fabrication in Coquitlam includes duct sections, fittings, transitions, plenums, reducers, and custom assemblies built to the dimensions provided. Joining sections are checked for alignment before they leave production, helping your installers spend less time modifying metal on site.
4. Quality Inspection and Verification
Before an order leaves the shop, every component is checked for dimensions, alignment, seam quality, welds, and finish. That extra inspection matters on commercial ductwork fabrication in Coquitlam, where one incorrect fitting can hold up equipment placement or the trades scheduled behind your crew. Problems are caught at the bench instead of after the component reaches a rooftop or mechanical room.
5. Delivery or Pickup Coordination
Finished components are packaged for transport and coordinated around the installation schedule. Our custom sheet metal fabrication services in Coquitlam can be prepared for site delivery or organized for pickup depending on how your crew wants to stage the job. The goal is simple: get the correct ductwork, fittings, and fabricated components into your hands when the installation is ready for them.
Where In-House Sheet Metal Fabrication Pays Off for Coquitlam Contractors
Less Field Cutting, Cleaner Airflow, and Faster Close-In on Coquitlam Jobs
Fewer Field Adjustments
Predictable Lead Times
Cleaner System Airflow
Lower Callback Risk
Simpler Site Coordination
Reliable fabrication is really about trust. When each duct, fitting, and hood matches the drawing and shows up on time, contractors can commit to their own deadlines with confidence. Duct Duct Goose builds that consistency into every Coquitlam order, from a one-off transition to a full commercial run. The next section breaks down the specific components we fabricate for local projects.
The Coquitlam and Tri-Cities Professionals Who Order From Our Fabrication Shop
Who We Serve With Professional Sheet Metal Fabrication in Coquitlam, BC
HVAC and Mechanical Contractors
General Contractors and Builders
Mechanical Engineers and Designers
Commercial Kitchen and Industrial Operators
The Sheet Metal Components We Fabricate for Coquitlam and Tri-Cities Projects
Ductwork, Hoods, Curbs, and Stainless Built for the Job
Custom Duct Fittings and Transitions
Elbows, tees, reducers, taps, offsets, and transitions are where a clean duct layout can get complicated fast. Our custom duct fabrication is built around your measurements, routing, and connection points so your crew is not trimming and rebuilding fittings inside a tight Coquitlam mechanical room. The goal is simple: pieces that line up, maintain airflow, and install the way the drawing says they should.
Roof Curbs and Equipment Curbs
A rooftop unit is only as good as what it sits on. We fabricate equipment curbs and adaptor curbs around the unit footprint, roof opening, and project dimensions so the equipment can sit level and the roof assembly can be properly finished around it. On wet Coquitlam rooftops, getting the curb dimensions right before delivery can save a lot of unpleasant field adjustments.
Commercial Kitchen Exhaust Hoods
A commercial hood has to fit the cooking line, exhaust layout, and available ceiling space. We fabricate stainless steel kitchen hoods to the dimensions provided for restaurants, commissaries, and foodservice projects throughout Coquitlam and the Tri-Cities. Our stainless steel fabrication also covers the custom transitions, panels, and surrounding metalwork these kitchen installations often require.
Grease Duct and Access Doors
Grease duct is not the place for improvised field joints. We fabricate welded grease-duct sections and access components around the project drawings and applicable requirements. Access doors are positioned so the finished system can still be inspected and cleaned after installation. For commercial kitchen projects, that means your crew receives components designed around both the exhaust route and future service access.
Sound-Insulated Ductwork
Mechanical noise becomes a much bigger issue when ductwork runs beside offices, residential units, hotel rooms, or other occupied spaces. We fabricate insulated duct sections and fittings around the project specifications while keeping airflow and installation space in mind. That is especially useful on mixed-use Coquitlam projects where mechanical rooms, shafts, and occupied areas can end up surprisingly close together.
Rooftop Flashing and Weatherproofing
Coquitlam gives rooftop metalwork plenty of rain to deal with. We fabricate flashing, caps, and custom weatherproof details around roof penetrations, curbs, and mechanical openings so installers have properly sized pieces ready when the rooftop work begins. These components can be coordinated alongside your commercial sheet metal fabrication order instead of being treated as a last-minute site problem.
Equipment Enclosures and Stands
Sometimes the equipment fits. The space around it does not. Our fabricators build custom enclosures, stands, supports, and protective metal assemblies around the dimensions and access requirements shown on your plans. We account for service clearance, mounting points, exposure, and the surrounding equipment so maintenance crews can still reach what they need after everything is installed.
Stainless Steel Work Surfaces and Sinks
Commercial kitchens, food-production spaces, and other wash-down environments need stainless components that can take daily use. We fabricate counters, work surfaces, shelves, backsplashes, and sinks to project dimensions, including pieces that have to fit around walls, equipment, plumbing, or existing millwork. When standard sizes leave an awkward gap, custom fabrication lets the metal follow the space instead of forcing the space to follow the metal.
Coquitlam, British Columbia’s Local Sheet Metal Fabricators for Commercial Work
We provide sheet metal fabrication in these Coquitlam postal codes:
V3E 0A8
V3E 3S6
V3J 0B6
V3J 7X2
V3K 0B9
V3K 4S8
Looking for Sheet Metal Fabricators Near Me? Proudly Serving Coquitlam and the Tri-Cities
Key Landmarks and Areas We Serve in Coquitlam, BC
Sheet Metal Fabrication in Coquitlam, BC, FAQs
We fabricate HVAC ductwork, custom fittings, kitchen hoods, grease duct, stainless steel components, and metal enclosures. Work is built to your drawings in galvanized steel, stainless steel, or aluminum, and prepared for installation on commercial and industrial job sites across Coquitlam.
Stock parts rarely fit real conditions. Custom fabrication is used when duct must route through tight mechanical rooms, connect mismatched equipment, or meet a specific airflow, gauge, or finish. Coquitlam’s dense towers and older industrial buildings often call for made-to-spec components.
Yes. We fabricate stainless steel hoods, counters, sinks, shelves, and lab exhaust. Stainless resists moisture, grease, and repeated wash-down, which suits the restaurants, cafes, and institutional spaces opening across Coquitlam’s City Centre and Fraser Mills areas.
Ductwork is built in line with applicable SMACNA standards and relevant ASHRAE guidance, to the pressure class and sealing your drawings specify. We check dimensions and seams before shipping. Final inspection and approval still rest with the project’s authority on site.
Lead times depend on the components, materials, and volume. We set a clear timeline when the order is confirmed and update you as it moves through the shop. Deliveries are scheduled to match your install sequence rather than arriving early.
Yes. Finished parts are packaged for wet-weather transport and delivered to sites across Coquitlam and the Tri-Cities, or held for pickup at our shop. We time delivery to your schedule so components arrive when your crew is ready to install.
