Skip to content 
Leak-Proof Condensate Drain Pans for Commercial HVAC Contractors
in Pitt Meadows, Surrey & Greater Vancouver, BC
Leak-Stopping Condensate Pans for Mechanical Contractors Across Greater Vancouver
Duct Duct Goose runs a Pitt Meadows sheet metal fabrication shop where condensate drain pans get cut, welded, and slope-checked before they leave the floor. A drain pan is the cheapest part under an air handler, right up until it fails and water is tracing down a ceiling tile. Our drain pan fabricators build primary and backup pans to match your coil, clearances, and outlet, with seams that hold and a pitch that clears. A goose is never bothered by a little water, and with the right pan under the unit, your ceiling won’t be either.
- Stop Ceiling Water Damage
- Match Any Coil Footprint
- Drain Clean Every Cycle
- Pass Mechanical Inspection
Local Owned
Years of Experience
Order a Drain Pan That Fits the First Time in Pitt Meadows
Send over the unit model and the drain location, and our condensate pan fabricators take it from there. You get a watertight pan sized to your air handler and ready to drop in, backed by mechanical-code know-how and quick turnaround across Greater Vancouver.
Why Duct Duct Goose Is the Go-To Shop for Condensate Drain Pan Fabrication in Pitt Meadows & Greater Vancouver
A Pitt Meadows Fabrication Shop That Treats Drainage as the Whole Job
For commercial and industrial HVAC work across Greater Vancouver, Duct Duct Goose fabricates condensate drain pans that do one job: move water out and keep it out. Our top-rated sheet metal shop forms primary pans, auxiliary pans, and drip trays in stainless, galvanized, and aluminum, welding watertight seams and cutting precise slopes. We’re a trusted sheet metal fabrication partner that Pitt Meadows mechanical contractors trust.
Watertight
Precise
Local
Meeting Mechanical Codes and Jobsite Expectations in Pitt Meadows & Greater Vancouver
Mechanical inspectors care about one thing with a drain pan: does the water go where it should? Our sheet metal fabricators build to SMACNA, ASHRAE, and local code, so every pan clears inspection on fit, slope, and overflow protection.
Metal Matched to the Moisture
Condensate is relentless, so the metal has to suit the conditions. Our drain pan fabricators run stainless, galvanized, and aluminum in several gauges, chosen for the humidity and chemistry a unit faces. Pick the right one, and corrosion stays a non-issue.
Seams That Don't Weep
A pan is only as good as its corners. Our HVAC sheet metal contractors TIG-weld the seams and dress them smooth, so there’s no pinhole and no slow weep months later. Water runs to the outlet and nowhere else, which is the whole point.
Built to SMACNA, ASHRAE, and Local Code
Overflow protection and proper pitch are where pans pass or fail inspection. Our sheet metal fabrication experts size auxiliary pans, set drain locations, and hit the slope SMACNA, ASHRAE, and local codes expect, so approvals come without a callback.
Shaped to the Unit, Not the Catalogue
Stock pans assume a stock unit, and units are rarely stock. Our condensate pan fabricators work from your equipment dimensions and clearances, building a pan that drops in tight with the outlet where your drain line actually lands. No shimming, no field cutting.
Condensate Drain Pan Types We Fabricate for HVAC Systems in Pitt Meadows & Greater Vancouver
Different units, different problems, different pans. Whatever sits above the ceiling, our condensate pan fabricators have a build for it, formed and welded in-house for watertight drainage and a fit that doesn't fight the install. Here's the range of mechanical contractors across the Lower Mainland that most reach for.
Primary Coil Pans
This is the pan doing the daily work, sitting directly beneath the evaporator coil to capture condensate as it forms. We weld each one watertight and pitch it toward the outlet so nothing lingers. Mechanical contractors across the Tri-Cities count on these for clean, continuous drainage.
Auxiliary (Secondary) Overflow Pans
When the primary drain clogs, this pan is the safety net the code requires. Set beneath the unit, our auxiliary pans catch the overflow and route it to a separate line before a single drop finds drywall. Sized and sloped for compliant installs throughout Pitt Meadows and beyond.
Fan Coil Unit Pans
Fan coils tuck into ceilings and closets where a leak goes unseen until it doesn’t. Our drain pan fabricators build slim, corrosion-resistant pans that fit those tight cabinets exactly, draining quietly and keeping moisture off the structure around them in buildings across Greater Vancouver.
Rooftop & Packaged Unit Pans
Up on the roof, pans battle sun, rain, and constant runtime. We form rugged, weather-ready pans for rooftop and packaged units that shrug off the elements and shed heavy condensate loads, protecting the roof deck and everything under it across Pitt Meadows commercial rooftops.
Walk-In & Refrigeration Pans
Cold rooms shed condensate and defrost water in volume. Our stainless steel fabricators build pans tough enough for refrigeration and walk-in units, catching meltwater before it pools on a cooler floor and keeping food-service spaces dry, safe, and inspection-ready across Pitt Meadows.
Equipment Drip Trays
Not every catch job sits under a coil. Custom drip trays slide beneath pumps, valves, and process gear to corral leaks and spills, protecting floors and equipment below. Our sheet metal fabricators size each tray to the footprint, with raised lips that keep stray water contained.
Insulated Condensate Pans
In humid plenums, a bare pan sweats and creates its own leak. Our insulated condensate pans wrap the underside in closed-cell insulation, stopping surface condensation cold and protecting the ductwork and ceiling below. A smart pick for damp mechanical rooms across Burnaby and Coquitlam.
Oversized & Industrial Pans
Large air handlers and process equipment need pans on another scale. Our trusted fabrication shop builds reinforced, oversized pans engineered to hold serious water without flexing, shaped to wrap awkward industrial footprints and keep plants across Metro Vancouver running dry under heavy load.
On-Demand Condensate Pan Fabrication for Pitt Meadows & Greater Vancouver
Pans Out the Door When Your Install Can't Wait
HVAC timelines rarely leave slack, and a missing drain pan can hold up a whole unit swap. We keep condensate pan production moving and our updates honest, so you know when your pans land. Rush a single auxiliary pan or stage a full building’s worth, the work stays on its feet, and your crew keeps installing.
-
After-Hours Coordination When You Need It
Plans change late, and units arrive early. Reach out to our expert condensate pan fabricators when a question or a sudden spec change comes up, and we'll line up the build, timing, and handoff so the project never stalls waiting on a pan.
-
Pans That Outlast the Warranty Call
A drain pan should outlive the callbacks. Welded seams, the right metal, and an honest slope mean ours keep draining years after install quietly, long after a folded-and-sealed pan would have started weeping.
Social Media :
Our Process
How a Set of Unit Specs Becomes a Pan That Just Drops In
There's no mystery to a pan that fits and drains, just a process we don't skip steps on. Every condensate pan we make follows the same five stages, from reading your unit specs to handing over a finished piece, each one aimed at watertight drainage, an exact fit, and a timeline you can actually plan around.
1. Consultation, Review & Planning
We start with the HVAC unit details; model, dimensions, coil positions, and drain line tie-ins. Coordinating with engineers or HVAC contractors early identifies clearance issues and unusual outlet locations, ensuring your custom condensate pans in Pitt Meadows are designed to fit perfectly and meet project specifications from the start.
2. Material Selection & Preparation
With the layout finalized, we select the right material: stainless steel for long-term durability, galvanized steel for budget-conscious units, or aluminum for lightweight overhead installations. Sheets are prepped, edges trimmed, and seams aligned so each sheet metal condensate pan is ready for precise fabrication and reliable performance.
3. Precision Production & Assembly
Each pan is cut to exact specifications, walls formed, and corners TIG-welded into a watertight unit. The slope and outlet placement are carefully set to ensure drainage efficiency. Our Pitt Meadows sheet metal contractors produce pans that seat correctly on the first installation attempt, minimizing field adjustments and downtime.
4. Quality Inspection & Verification
Every condensate pan undergoes a thorough inspection for seam integrity, slope accuracy, dimensional compliance, and finish quality. Only units that meet these standards leave the shop, giving HVAC contractors confidence that the custom stainless steel and galvanized pans will perform flawlessly on commercial and industrial systems.
5. Delivery or Pickup Coordination
Finally, we schedule delivery or pickup to align with your installation timeline. Pans are packaged to prevent damage in transit and delivered on the day you need them, whether for a single unit or a multi-unit project. Our goal: condensate pans in Pitt Meadows arrive ready to install and keep your project running smoothly.
Why a Well-Built Condensate Pan Pays for Itself in Pitt Meadows
The Cheapest Insurance Your Ceiling Will Ever Get
Nobody budgets much for a drain pan, which is exactly why a bad one stings. A failed pan doesn't just leak; it stains ceilings, soaks insulation, rusts ductwork, and drags a crew back to a job they thought was closed. A pan built right erases that risk for the cost of doing it once.
Save Ceilings From Leaks
Avoid Warranty Callbacks
Drop In Without Shims
Drain on Every Cycle
Outlast the Equipment
Spend a little thought on the pan and the rest of the system thanks you for it. Duct Duct Goose builds condensate pans that fit on the first try and drain for the long haul, so mechanical contractors close out HVAC jobs without leaving a water problem ticking behind the ceiling. It is a small part, done properly, that quietly protects everything around it.
Who Relies on Our Condensate Pan Fabrication Across Pitt Meadows & Greater Vancouver
Condensate pans touch a lot of hands on a project, from the engineer who specs the unit to the tech who hangs it. We build for everyone in that chain across Pitt Meadows and Greater Vancouver, shaping each part to slot cleanly into whatever role and schedule the job demands.
Mechanical & HVAC Contractors
Consulting & Mechanical Engineers
General & Industrial Contractors
Building Owners & Facility Teams
Condensate Pan Fabrication Finishes in Pitt Meadows
Drain Pan Materials, Slopes, and Seams Engineered for Pitt Meadows HVAC Systems
Stainless Steel Pans (304 & 316)
For commercial HVAC in Pitt Meadows, our stainless steel condensate pans offer durability and corrosion resistance. 304 stainless handles standard systems, while marine-grade 316 is perfect for units exposed to salt air or chemicals. Custom stainless steel pans fabricated in Pitt Meadows ensure long-lasting, leak-free performance for HVAC contractors.
Galvanized Steel Pans
Budget-conscious but reliable, galvanized steel condensate pans fabricated in Pitt Meadows are ideal for dry, low-moisture HVAC applications. Sheet metal contractors form these pans for fast installation, clean drainage, and dependable service in commercial units across the Pitt Meadows area.
Aluminum Pans
When weight is critical, our aluminum HVAC condensate pans in Pitt Meadows are the go-to solution. Lightweight, corrosion-resistant, and strong, these pans make rooftop and overhead installations easier while maintaining longevity and reliability for local HVAC contractors.
Pitch & Outlet Placement
A precise slope matters. Custom condensate pans in Pitt Meadows are engineered with exact pitch and outlet placement, ensuring water drains completely every cycle. Properly sloped pans reduce standing water, prevent mold, and guarantee consistent HVAC system performance.
Welded Watertight Seams
Cheap pans leak at the corners. Our sheet metal contractors TIG-weld each condensate pan in Pitt Meadows into a single watertight shell. No cracks, no peeling, no weeping—just durable, leak-proof HVAC pans ready for heavy daily use.
Raised Overflow Lips
Safety margin built in. Condensate pans fabricated in Pitt Meadows feature raised lips to contain more water before it spills, complying with code and giving contractors peace of mind when installing auxiliary pans in commercial HVAC systems.
Gauge & Reinforcement
Large pans face heavy water loads. Stainless steel and aluminum condensate pans fabricated in Pitt Meadows use thicker gauges and cross-bracing to prevent sagging or pooling. Contractors get stable, reinforced units for wide industrial and commercial applications.
Insulation & Protective Coatings
We finish each pan with closed-cell insulation to stop sweating and protective coatings to extend life in harsh conditions. Custom Pitt Meadows condensate pan fabrication keeps surrounding ductwork dry, prevents corrosion, and ensures reliable HVAC performance over years of heavy use.
Pitt Meadows, British Columbia's Local Condensate Drain Pan Fabrication Shop
Being down the road from your jobsite changes how a project runs. Our Pitt Meadows sheet metal contractors know the mechanical inspectors, the building stock, and the weather that drives condensate loads here, which means fewer surprises and faster answers when plans shift. A pan can be remeasured, re-welded, and back to you in a fraction of the time a distant supplier needs just to call back, and that proximity is worth real money when an install is waiting.
Serving HVAC Projects From Pitt Meadows Out Across the Lower Mainland
Searching for a Condensate Drain Pan Fabricator Near Me? We're Right Here in Pitt Meadows
If you're hunting for a local shop to build condensate pans, the search ends in Pitt Meadows. We work with mechanical contractors, facility teams, and builders right across the area, and we know the buildings and inspectors here. Send the specs, and we'll have a pan waiting.
Notable Places & Local Landmarks
Condensate Drain Pan FAQs
Most codes require a secondary pan whenever a leak could damage the space below, like units in attics, ceilings, or above finished rooms. If the primary drain clogged, ask where the water would go. If the answer is drywall, you need a backup pan.
Yes, because we build to your unit's actual footprint, clearances, and drain location rather than a generic size. That means it seats without shims or field cutting, and the outlet lines up with your drain line, which saves time on the install.
Leaks usually start at folded or sealed corners that crack over time, or from a pan with no real slope. We weld corners into one continuous shell and pitch the floor toward the outlet, removing the two most common failure points.
Stainless lasts longest and suits humid or chemical-heavy spots, galvanized is economical for dry, mild conditions, and aluminum keeps overhead units light. The right call depends on the environment and the unit's location, which we'll walk through with you.
We do. Coolers and freezers produce condensate and defrost water that needs catching just like an HVAC coil. We build corrosion-resistant pans sized for refrigeration equipment so meltwater drains away instead of pooling on the floor.
It varies with size, metal, and quantity, but because we cut and weld in-house, most pans move quickly, and we can rush a single piece when an install is stuck. Send the specs early and we'll give you a firm date.
