Skip to content 
Commercial Sheet Metal Fabrication for Contractors
in Langley, BC
Langley Sheet Metal Built Around the Job, Not the Catalog
Langley projects can put your crew anywhere from Willoughby to Gloucester, and a bad fit means more than a quick adjustment. It means another drive, another delay, and another trade waiting behind you. Duct Duct Goose fabricates custom ductwork, fittings, kitchen hoods, exhaust components, stainless steel assemblies, and sheet metal enclosures in-house from your drawings. We cut, form, weld, label, and stage each order so your crew gets parts that are easier to identify, easier to install, and less likely to come back for field modification.
- Built to Drawings
- Staged by Project
- Less Field Rework
- Ready for Install
Local Owned
Years of Experience
Get Sheet Metal Fabrication Sized for Your Langley Jobsite
Send your drawings and our sheet metal specialists will scope the fit, materials, and lead time before anything hits the brake. From single fittings to full duct packages, we build for contractors across Langley and Greater Vancouver. Start your order today.
Why Langley Contractors Choose Our Fabrication Shop
Built Accurate to the Drawings, Staged for the Jobsite
Duct Duct Goose handles commercial sheet metal fabrication for Langley contractors who need parts built around the drawings, not pulled from a catalogue. Our in-house shop combines CNC cutting, brake forming, and welding to produce duct sections, custom duct fittings, kitchen hoods, and stainless assemblies. Each order is checked against the dimensions and project requirements before it leaves the shop, helping your crew spend less time correcting metal in the field.
Upfront
Fixed pricing before we build
In-house
Built and checked in one shop
Staged
Parts labelled and sequenced
Sheet Metal Built to Match the Langley Project Specs
Galvanized, Stainless, or Aluminum by Application
We fabricate in galvanized steel for standard HVAC runs, stainless for wash-down, food, and lab spaces, and aluminum where weight matters. Gauge and grade match the load, moisture, and airflow each part will face, not a one-size default.
Tight Seams That Hold the Airflow
Duct sections, transitions, and fittings are formed to tight tolerances and sealed at the seams. Clean joints and accurate dimensions keep designed airflow intact, cut leakage, and support the pressure class the mechanical plan calls for.
Built to Project Specifications and Applicable Standards
Our trusted sheet metal shop fabricates to the pressure class, sealing requirements, gauge, material, and dimensions shown on your approved drawings. Where the project specifications reference SMACNA, ASHRAE, NFPA 96, or applicable British Columbia requirements, we build the components accordingly so your installers receive metalwork aligned with the documented project requirements.
Custom Parts for Non-Standard Layouts
From reducers and offsets to plenums and one-off enclosures, we build made-to-spec parts around real space constraints and connection points. Each piece is sized for the opening it fits, so crews spend less time trimming metal in the field.
Commercial Sheet Metal Fabrication Services for Langley Projects
Commercial Sheet Metal Fabrication
General contractors and builders use this for the metalwork a commercial build needs, but a catalogue does not carry. We fabricate custom sheet metal parts and assemblies to your drawings, sized for the opening they fit, so installs across the township move without field guesswork.
HVAC Ductwork Fabrication
Mechanical and HVAC contractors use our HVAC ductwork fabrication for rectangular, round, and custom duct sections built from the mechanical drawings. Accurate dimensions and connection points give Langley install crews less metal to trim, reshape, or rebuild before ceiling close-in.
Stainless Steel Fabrication
Food, beverage, laboratory, and industrial projects often need metal that can handle moisture, wash-down, and demanding operating conditions. Our stainless steel ductwork fabrication covers custom sections and welded assemblies built to the drawings for Langley and Fraser Valley projects.
Commercial Kitchen Exhaust and Hoods
Restaurant and food-service projects need exhaust components that fit the cooking line, duct route, and available ceiling space. Our commercial kitchen hood fabrication includes custom hoods and related metalwork built around the project layout, with grease-duct components fabricated where specified.
Industrial Exhaust and Ventilation
The industrial tenants filling Langley’s estates run equipment that has to vent heat and fumes. We build heavier-gauge exhaust ducting and ventilation parts that handle high output and connect cleanly to the equipment on the floor.
Lab and Medical Exhaust Systems
Research and medical facilities need controlled, contaminant-safe airflow. We fabricate fume-hood and lab-exhaust components from corrosion-resistant metals, built for the containment and airflow these spaces depend on every day.
Custom Metal Enclosures and Supports
When equipment needs a housing, base, or bracket that no supplier stocks, we build it. Custom enclosures and supports are fabricated to the equipment and the space, protecting gear and simplifying the install.
CAD Review and Shop Drawings
Send a CAD file or a set of measurements, and our shop reviews it before cutting. Early drawing review catches conflicts on paper instead of on site, which matters when drawings on a fast Langley build keep changing.
Keep Your Langley Project Moving
Fabrication Support When the Schedule Gets Tight
A late fitting or missing duct section can hold up more than the mechanical crew. Send us the drawings, dimensions, and install sequence, and we will help line up the fabrication before your team is waiting on parts. We set clear lead times, flag drawing changes early, and keep you updated when a revision affects production or delivery.
-
Project Guidance When Timing Gets Tight
Planning an upcoming phase or working through an urgent change, you can reach us for coordination and scheduling help. We keep fabrication moving forward and keep you informed rather than leaving you chasing an update.
-
Built for Long-Term Performance
Every part leaves the shop built to run for years, not just to pass the first day. Accurate fit and consistent construction reduce callbacks and keep systems performing as the mechanical design intended well after handoff.
Social Media :
Our Process
From Your Drawings to Install-Ready Components
1. Consultation, Review and Planning
We start with your drawings, specifications, and performance requirements. Reviewing scope early lets us confirm feasibility, flag conflicts, and line up materials and lead time with your install sequence before any cutting begins.
2. Material Selection and Preparation
Next, we choose materials suited to the application, whether that is galvanized for standard runs or stainless for wash-down and exhaust. Careful prep at this stage keeps dimensions accurate and results consistent through the rest of the build.
3. Precision Production and Assembly
Production and assembly follow the approved drawings closely. Each section, fitting, and weld is built for dimensional accuracy and clean integration, so the parts drop into the larger system instead of forcing a field adjustment.
4. Quality Inspection and Verification
Before anything ships, completed parts are checked for dimensions, alignment, seams, and finish. This step catches issues in the shop rather than on a Langley rooftop, where a fix costs a crew far more time and money.
5. Delivery or Pickup Coordination
Finished parts are labelled, staged by site, and scheduled for delivery or pickup to match your build. Across a township this spread out, sequencing the drop-off matters as much as the fabrication itself.
What Better Fabrication Changes on a Langley Jobsite
Less Rework, Faster Installs, Cleaner Handoffs
Fewer Field Adjustments
Faster Installs
Cleaner Airflow
Fewer Callbacks
Predictable Lead Times
Reliable results are the point of building in-house. When parts fit, seal, and arrive on schedule, contractors close in faster and hand off systems that run as designed. Duct Duct Goose backs Langley and Fraser Valley projects with that consistency, so each order reduces rework instead of adding to it. The section below breaks down the specific components we fabricate.
Who We Serve With Custom Sheet Metal Fabrication in Langley and Greater Vancouver
Who We Serve With Custom Sheet Metal Fabrication in Langley, BC
HVAC and Mechanical Contractors
General Contractors and Builders
Commercial Kitchen and Food Processors
Industrial and Lab Facility Teams
Sheet Metal Components We Fabricate for Langley Projects
Ductwork, Stainless, Curbs, and Custom Parts Built to Fit
Rectangular and Round Duct Sections
Straight duct may look simple, but bad dimensions can throw off an entire run. Our HVAC ductwork fabrication includes rectangular, round, and custom duct sections built around the mechanical drawings. Accurate lengths and connection points mean less trimming, fewer improvised joints, and an easier install for Langley HVAC crews.
Elbows, Reducers, and Transitions
This is where straightforward duct runs start getting interesting. Our custom duct fittings include elbows, reducers, offsets, transitions, and other pieces built for changes in direction, size, or elevation. Instead of forcing a stock fitting into an awkward route, your crew gets the geometry the layout actually calls for.
Roof Curbs and Flashing
Rooftop equipment needs more than a piece of metal underneath it. Our roof curbs and flashing are fabricated around equipment dimensions, roof openings, and project requirements. Getting those measurements right in the shop helps your team avoid cutting and rebuilding curb details after the unit is already waiting on the roof.
Filter Boxes and Air Control Boxes
Filters, dampers, and air-control components need housings that fit properly without choking the system around them. We fabricate filter boxes and custom air-control housings to the dimensions provided, with access and connection points considered before production. That gives installers cleaner transitions and gives maintenance crews a more practical way to reach components later.
Sound-Insulated Ductwork
Nobody wants mechanical noise travelling through offices, clinics, retail spaces, or mixed-use buildings. Our sound-insulated ductwork fabrication covers lined duct sections, acoustic transitions, plenums, and related components built around the project’s airflow and noise-control requirements. Your crew gets acoustic ductwork made for the layout instead of trying to modify standard sections on site.
Grease Duct Runs
Commercial kitchen exhaust is one place where the details cannot be an afterthought. Our grease ductwork fabrication includes welded duct sections and related components built around the kitchen layout and exhaust route. Access, connection points, and cleaning requirements are considered during fabrication so the finished run is easier to install and service.
Stainless Work Surfaces and Wash-Down Assemblies
Food production, kitchens, and other wash-down environments need metal that can take daily cleaning without becoming a maintenance headache. Our stainless steel fabrication covers custom work surfaces, shelves, assemblies, and other made-to-spec components built around equipment, walls, plumbing, and the space available.
Equipment Bases and Access Platforms
Equipment does not always land where a standard support will work. Our custom metal supports and enclosures are fabricated around equipment dimensions, mounting requirements, service clearance, and site conditions. That includes custom bases, stands, protective enclosures, and support assemblies built to make installation cleaner and future access easier.
Local Sheet Metal Fabricators Serving Langley, BC
We provide sheet metal fabrication in these Langley postal codes:
V4W 3V6
V2Y 0J5
V2Z 2B8
V3A 6C2
V1M 3K3
V4W 2C8
Looking for Expert Sheet Metal Fabricators Near Langley, BC?
Recognizable areas we serve near Langley:
Sheet Metal Fabrication in Langley, BC, FAQs
It covers custom metal parts a build needs beyond stock supply: duct sections, fittings, kitchen hoods, exhaust runs, stainless assemblies, and enclosures. Each piece is cut, formed, and welded to your drawings so it fits the specific opening, layout, or equipment on site.
Custom work is needed when layout, airflow, space, or equipment does not match standard sizes. Non-standard routing, tight mechanical rooms, and specialty exhaust all call for parts built to spec, which reduces field trimming and keeps the installed system performing as designed.
We work in galvanized steel, stainless steel, and aluminum. Galvanized suits standard HVAC runs, stainless handles wash-down, food, and lab conditions, and aluminum helps where weight matters. Grade and gauge are selected for the load, moisture, and airflow each part will face.
We fabricate in line with applicable SMACNA guidance and ASHRAE performance considerations, and grease ducts follow NFPA 96. Parts are built to your approved drawings and applicable BC codes to support inspection-ready installation, though final approval rests with the authority having jurisdiction.
We confirm realistic lead times up front and plan production around your milestones. Finished parts are labelled, staged by site, and scheduled for delivery or pickup. Across a service area this large, sequencing the drop-off keeps trades from waiting on the next section.
Yes. Send CAD files, shop drawings, or field measurements and the shop reviews them before cutting. You can submit specifications through the online ordering portal, review the details, and confirm materials and finish before fabrication starts.
